Our 1:18 crawler in the PRO version can do more than some of its big brothers. Especially with the "Performance Upgrade" like portal axles front and rear, metal gearbox made of tool steel, 1.2" tires and a modified drive ratio for even more torque it becomes a real crawler fun machine. You do not need much space and the "Playground" is built quickly. For example, just throw a few pillows or on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the little crawler over even the most complicated-looking obstacles. HIGHLIGHTS: Portal axles front & rear Metal gears on front and rear axles 2.4GHz transmitter/receiver unit Lighting system operated from the transmitter Oversize 1.2" AT tires with internal bead lock system Chassis mounted 1kg steering servo with panhard bar PPX4 water resistant electronics Metal chassis frame Painted 1.2mm Lexan body Tight turning circle of 80cm Driving time of up to 45 minutes Steering angle of up to 45° Ultimate ground clearance due to portal axles and 1.2" tires Due to its design, the "Trail Hunter" chassis has probably the highest ground clearance currently available on the market. Battery box and on-switch are located on the loading area. Thus, no disassembly of the body is necessary in daily use. The operation of the standard lighting front and rear consisting of low beam and taillight is done directly on the transmitter by (repeated) actuation of the 3rd channel. Newly developed portal axle with new drive ratio. This realizes a buttery smooth response at low speed and even more torque. With the new axle, up to 45° steering angle is also achieved. The gears in the axles is made of tool steel. CVD drive shafts are installed on the front axle. FEATURES: Scale: 1:18 4WD (all-wheel drive) 2.4GHz remote control system High Torque gears, reduction ratio 104:1 55T / 030 Brushed Motor Fully locked differentials (front & rear) Telescopic UJ cardan shafts Metal chassis frame Drag/Mountain Brake (prevents rolling on hills) Digital Proportional Control for sensitive driving maneuvers LED lighting Scale body with a lot of attachments Bead lock rims with super soft AT tires Waterproof 1kg mini steering servo 2-in-1 speed controller/receiver unit Driving time: approx. 45 minutes Extreme approach and departure angle (67.4° / 80.5°) Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50A Remote control: 2.4GHz, 4-channel Steering servo: 1kg actuating force, waterproof Motor: 030 / 55T Gear ratio: 104:1 Battery: LiPo 7.4V/2S 600mAh Battery connector system: Molex 2-pin Wheelbase: 158,5mm Ground clearance: 43,7mm Track width: 110mm Length: 241m Width: 125mm Height: 130.8mm Weight: 400g Wheels: 19.5x58mm INCLUDES: 1* Mini PRO Crawler 1* 2.4GHz transmitter unit 1* LiPo battery 7.4V 600mAh 1* US charging cable 1* Sticker sheet 1* Manual DE/EN/FR 1* Mini tool kit 4 x AA Batteries For Transmitter Required